17. Dummy Input Signal

   Enter simulated input signals from
   CommPad to control the valve instead of
   input signals from the controller.
   
   Tap [0%], [25%], [50%], [75%], or
   [100%] to move the valve to the
   respective travel position. Tapping
   [Clear] will allow input signals from the
   controller to control the valve travel.
   
   To read the current travel value and
   drive signal (where the control output is
   the value of the current to the coil), tap
   [Read].
   To set an arbitrary value, tap [Set any    value].